See wk list font.

Formulas displayed as references or values are highlighted (value for wk formula highlight)

Defines the horizontal alignment of an image or a text box relative to the origin (see wk anchor origin). Possible values:

• wk left - left align
• wk center - center align (not compatible with HTML, images are not displayed on the web)
• wk right - right align

Defines the horizontal offset of an image or a text box expressed in a CSS dimension string or longint (cm or pt or pixel) from wk layout unit. Possible values:

• Left or right limit of the page relative to the wk anchor horizontal align
• Left or right limit of body in embedded mode (if wk anchor section = wk anchor embedded)

Default value = 0.

Defines the layout position of an image or a text box relative to the text on a page. Possible values:

• wk behind text - image or text box is anchored, behind the text
• wk in front of text - image or text box is anchored, in front of the text
• wk inline with text - image is inline with text (default for images inserted with WP INSERT PICTURE). Not available for text boxes. Read-only attribute (inline pictures cannot be converted to anchored pictures by programming).

Defines if image or text box is anchored to the page, header or footer. Possible values:

• wk paper box (default) - image or text box is anchored to the edge of the page
• wk header box - image or text box is anchored to the document header. If the header is not visible, image or text box is not displayed.
• wk footer box - image or text box is anchored to the document footer. If the footer is not visible, image or text box is not displayed.

This selector is ignored in embedded mode.

Defines the page index or the type of page an image or a text box is anchored to. Possible values:

• wk anchor all - anchors an image or a text box to all pages of the section(s) defined by wk anchor section
• wk anchor first page - anchors an image or a text box to the first page subsection of the section(s) defined by wk anchor section
• wk anchor left page - anchors an image or a text box to the left pages subsection of the section(s) defined by wk anchor section
• wk anchor right page - anchors an image or a text box to the right pages subsection of the section(s) defined by wk anchor section
• a number (Longint >= 0) indicating which page to anchor the image or text box to. In this case, wk anchor section = wk anchor all. Section anchoring is ignored if an image or a text box is anchored to a single page.

Note: Images and Text boxes in Page mode are not displayed in browsers.

Defines the section index or the type of section that an image or a text box is anchored to. Possible values:

• wk anchor all (default) - anchors an image or a text box to all sections in a document (image or text box is only visible in page mode)
• wk anchor embedded - anchors an image or a text box to the document body in embedded mode (image or text box is only visible in embedded mode)
• a number (Longint >= 1) indicating the section to anchor the image or text box to (image or text box is only visible in page mode).

Note: Images or text boxes in Page mode are not displayed in browsers.

Defines the vertical alignment of an image or a text box relative to the origin (see wk anchor origin). Possible values:

• wk top - top align
• wk center - middle align (not compatible with HTML, images are not displayed in browsers)
• wk bottom - bottom align

Defines the vertical postion of an image or a text box expressed in a CSS dimension string or number (cm or pt or pixel). Possible values:

• Top, center or bottom limit of the page (see wk anchor origin) or
• Top, center or bottom limit of body in embedded mode (if wk anchor section = wk anchor embedded). 

Default value = 0.

• wk true (default): widow and orphan control is enabled
• wk false: widow and orphan control is disabled (isolated lines are allowed)
• wk mixed when reading the attribute

• wk border box (default): background is painted to outside edge of the border
• wk content box: background is painted within the content box
• wk padding box: background is painted to outside edge of the padding (or to inside edge of the border, if any)
• wk paper box: background is painted to the edge (document or sections only)

Specifies background color of an element. Possible values:

• a CSS color ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value (see OBJECT SET RGB COLORS command)
• a longint array containing an element for each R, G, B component (0-255)

Default for documents is "#FFFFFF" and wk transparent, or "transparent" for paragraphs and images.

Sets the display mode of images used as background, based on a preset of the following "real" attribute values: wk background origin, wk background repeat, wk background position horizontal, wk background position vertical, wk background width, wk background height

Possible values:

• wk scaled to fit
• wk truncated
• wk truncated centered
• wk proportional
• wk proportional centered
• wk replicated (default)
• wk replicated centered

Note: The origin rectangle is set to the padding box (the image rectangle including the padding area but excluding the border area).

When getting the value of this attribute, the returned value is either:

• one of the possible display modes, for example wk replicated, if all the real attributes have the preset values for this mode
• "custom" if at least one real attribute's value differs from the preset ones for any mode. For example, if the preset value of wk background width is changed after applying wk background display mode, WP GET ATTRIBUTES returns "custom" when getting the value of wk background display mode.

• wk auto (default): background image retains its height
• wk contain: scales image to largest size so that it fits entirely in the content area, while preserving its aspect ratio. This option also modifies the value of the other size attributes.
• wk cover: scales background image to be as large as possible so that the background area is entirely covered by the background image, while preserving its aspect ratio. Some parts of the background image may be cropped. This option also modifies the value of the other size attributes.
• Defined size: background image vertical size expressed using a number or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt. A relative value (percentage %) is also supported.

• Value returned (WP GET ATTRIBUTES): If the image was defined through a network URL, the target image is returned if it was already loaded, otherwise an empty image is returned.

Use wk background image url if you want to handle pictures through URLs or local URIs.

• Value returned (WP GET ATTRIBUTES): Network URL or data URI. It may not be equal to the initial URL for an image not referenced with the network URL (only network URLs are kept). For local file URLs, the image stream itself is kept in the document and thus the URL returned is a data URI with the image stream encoded in base64.

Use wk background image if you want to handle background images as picture expressions.

• wk padding box (default): background image starts at padding (or inside border edge) rectangle
• wk border box: background image starts at border (outside edge) rectangle
• wk content box: background image starts at content rectangle
• wk paper box: background image starts at edge (document or sections only)

• wk left (default): background image starts horizontally on left side of the element
• wk center: background image starts horizontally at center of the element
• wk right: background image starts horizontally on right side of the element

• wk top (default): background image starts vertically at top of the element
• wk middle: background image starts vertically at middle of the element
• wk bottom: background image starts vertically at bottom of the element

• wk repeat (default): background image is repeated both vertically and horizontally
• wk no repeat: background image is not repeated
• wk repeat x: background image is repeated only horizontally
• wk repeat y: background image is repeated only vertically

• wk auto (default): background image retains its width
• wk contain: scales image to largest size so that it fits entirely in the content area, while preserving its aspect ratio. This option also modifies the value of the other size attributes.
• wk cover: scales background image to be as large as possible so that the background area is entirely covered by the background image, while preserving its aspect ratio. Some parts of the background image may be cropped. This option also modifies the value of the other size attributes.
• Defined size: background image horizontal size expressed using a real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt. A relative value (percentage %) is also supported.

Inserts a vertical bar at tab position (value for wk type and wk tab stop types)

• a CSS color ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

Default is "#000000" (if string value). If there are multiple colors, WP GET ATTRIBUTES returns an empty string.

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000"
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000"
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000"
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000"
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• wk none (default): the border does not have rounded angles
• Radius value expressed using a number or a string value:
  
  • Number: Radius in wk layout unit.
  • String: CSS string with value and unit concatenated.(e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)

• wk none (default): no border
• wk hidden: same as wk none, except in border conflict resolution
• wk solid: solid border
• wk dotted: dotted border
• wk dashed: dashed border
• wk double: double border
• wk groove: 3D groove border (actual effect depends on the border color)
• wk ridge: 3D ridged border (actual effect depends on the border color)
• wk inset: 3D inset border (actual effect depends on the border color)
• wk outset: 3D outset border (actual effect depends on the border color)

• wk none (default): no border
• wk hidden: same as wk none, except in border conflict resolution
• wk solid: solid border
• wk dotted: dotted border
• wk dashed: dashed border
• wk double: double border
• wk groove: 3D groove border (actual effect depends on the border color)
• wk ridge: 3D ridged border (actual effect depends on the border color)
• wk inset: 3D inset border (actual effect depends on the border color)
• wk outset: 3D outset border (actual effect depends on the border color)

• wk none (default): no border
• wk hidden: same as wk none, except in border conflict resolution
• wk solid: solid border
• wk dotted: dotted border
• wk dashed: dashed border
• wk double: double border
• wk groove: 3D groove border (actual effect depends on the border color)
• wk ridge: 3D ridged border (actual effect depends on the border color)
• wk inset: 3D inset border (actual effect depends on the border color)
• wk outset: 3D outset border (actual effect depends on the border color)

• wk none (default): no border
• wk hidden: same as wk none, except in border conflict resolution
• wk solid: solid border
• wk dotted: dotted border
• wk dashed: dashed border
• wk double: double border
• wk groove: 3D groove border (actual effect depends on the border color)
• wk ridge: 3D ridged border (actual effect depends on the border color)
• wk inset: 3D inset border (actual effect depends on the border color)
• wk outset: 3D outset border (actual effect depends on the border color)

• wk none (default): no border
• wk hidden: same as wk none, except in border conflict resolution
• wk solid: solid border
• wk dotted: dotted border
• wk dashed: dashed border
• wk double: double border
• wk groove: 3D groove border (actual effect depends on the border color)
• wk ridge: 3D ridged border (actual effect depends on the border color)
• wk inset: 3D inset border (actual effect depends on the border color)
• wk outset: 3D outset border (actual effect depends on the border color)

• Width expressed using a number or a string value:
  
  • Number: Width in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• Default value: 2pt

• Width expressed using a number or a string value:
  
  • Number: Width in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• Default value: 2pt

• Width expressed using a number or a string value:
  
  • Number: Width in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• Default value: 2pt

• Width expressed using a number or a string value:
  
  • Number: Width in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• Default value: 2pt

• Width expressed using a number or a string value:
  
  • Number: Width in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• Default value: 2pt

Specifies if carry-over rows must be repeated at the bottom of each page/column of a split datasource table but on the last page/column in value display mode (the carry-over row must be created in the table template, see Carry-over rows). Available values:

• true: add carry-over rows at the bottom of split tables
• false (default): do not add carry-over rows at the bottom of split tables

This feature is only available with tables filled by datasources returning a non-empty collections or entity selections. In any other context, the bottom carry-over row, if designed, is rendered as a regular row. 

Note: Carry-over rows are not rendered in Embedded view mode.

4D formula object to use for the sort break row (usually a formula based on an item property like "This.item.name" in order to make sure the value changes and therefore the break row is generated).

Defines if carriage returns (CR) returned by formulas are treated as paragraph breaks. Possible values:

• wk true - Interpreted as paragraph breaks
• wk false - (default value) Interpreted as line breaks 

Note: If a formula uses This.pageNumber or This.pageCount, the attribute is ignored, carriage returns are always interpreted as line breaks.

(Read-only attribute) Type of break within a break range object returned by WP Get breaks. Possible values:

• wk line break,
• wk paragraph break,
• wk column break,
• wk page break,
• wk section break,
• wk continuous section break

Strings are compared with no consideration of capitalization differences. Note that diacritical marks are taken into consideration. For example, "A" is considered the same as "a", however "a" is not considered the same as "à". 

Centers text or image (value for wk background position h, wk text align, wk type, and/or wk tab stop types)

CID host domain name: host domain that will be added to generated CID URLs including an '@' as separator. Available only when the wk mime html format is used.

• For a table: read-only attribute
• For a document or a section: read-write attribute. Default value=1 (single column). Maximum value=20

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000" (black)
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• wk none (default): no rule
• wk hidden: same as wk none, except in rule conflict resolution
• wk solid: solid rule
• wk dotted: dotted rule
• wk dashed: dashed rule
• wk double: double rule
• wk groove: 3D groove rule (actual effect depends on the rule color)
• wk ridge: 3D ridged rule (actual effect depends on the rule color)
• wk inset: 3D inset rule (actual effect depends on the rule color)

• Real: width in wk layout unit.
• String: width value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
  Default value="2.5pt"

• Real: width in wk layout unit
• String: width value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters).
  Default value="12pt"

• Real: width in wk layout unit.
• String: width value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)

Use comma character (value for wk tab decimal separator)

Defines a continuous section break (often used to change the number of columns without starting a new page).

Specifies the datasource for the table. Possible values: 

• formula object: the table is associated with a datasource. If the formula returns a non-empty entity selection or collection, rows are duplicated from the template row and automatically filled with data from entities or collection elements (see Table datasource). Otherwise, rows are standard.  
• null: the table is not associated with a datasource (standard table).

Returns last modification date of document (date). This value is read-only and cannot be set.

Note that this value is dynamically updated each time the document contents are edited, but not when the document is opened or saved. 

Formatted HTML code ("pretty print"), easier to debug

Decimal alignment (value for wk type and wk tab stop types) or numbers used (value for wk list style type)

The style by default of paragraphs in 4D Write Pro documents.

Strings are compared but the diacritical mark (e.g., accent or symbol) of letters is ignored. For example, "a" is considered the same as "à". 

• wk left to right (default)
• wk right to left

Displays formula references as a symbol. Works only if formulas are displayed as references (see wk visible references). Possible values: True/False

Specifies that all expressions in the document are not recomputed before printing or freezing.

• Body / headers / footers / sections
• Page / print settings (margins, background color / image, borders, padding, paper size / orientation)
• Images - inline, anchored, and background image pattern (defined with wk background image)
• Compatible variables and expressions (page number, number of pages, date, time, metadata). Non-compatible variables and expressions will be evaluated and frozen before export.
• Links -
  
  • Bookmarks
  • URLs

For SVG Export only. Sets whether pictures are embedded in the exported .svg file when you call WP EXPORT DOCUMENT. Available values:

• true (default): Pictures are embedded in the exported .svg file
• false: Pictures are exported in a folder called "filename_images" at the level of the exported .svg file, "filename" being the name passed to the command for the file, without the extension. The pictures are not embedded, but referenced in the .svg file. Note that: 
  • If the folder already exists, it is emptied before the file is exported
  • If there is no image on the exported page, the folder is deleted

• Range end offset, or
• Section or subsection text end index in the document body (for subsection, text end index of the parent section).

Value type: Longint

Find or replace only the first occurrence of the string.

Search is performed in reverse order.

• wk true to set selected characters to bold font style; with the WP GET ATTRIBUTES command, wk true is returned if at least one selected character supports a bold font style.
• wk false (default) to remove the bold font style from selected characters if any; with the WP GET ATTRIBUTES command, wk false is returned if none of the selected characters supports a bold font style.

Object defining the default substitution font(s) for the document (i.e. fonts to be used instead of document fonts that are not available in the OS). It contains:

Notes:

• Each property can contain a string (e.g. "Arial") or a collection of strings (e.g. ["Arial","sans-serif"]). Font names must be family font names or "sans-serif", "serif", "monospace", "cursive" or "fantasy" to target generic font family like in html/css font-family. 
• By default if the wk font default is not set, or if none of defined fonts are available on a platform, font substitution is delegated to the OS.

• wk true to set selected characters to italic or oblique font style; with the WP GET ATTRIBUTES command, wk true is returned if at least one selected character supports an italic or oblique font style.
• wk false (default) to remove the italic or oblique font style from selected characters if any; with the WP GET ATTRIBUTES command, wk false is returned if none of the selected characters supports an italic or oblique font style.

• Real value (default = 12)
• CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points)

Formula highlight view mode. Possible values:

• wk references (default): Formulas displayed as references are highlighted 
• wk values: Formulas displayed as values are highlighted 
• wk always: Formulas are always highlighted, whatever their display mode
• wk never: Formulas are never highlighted, whatever their display mode

Highlighted formula color can be set by wk formula highlight color.

Color of highlighted formulas (see wk formula highlight). Possible values:

• a CSS color string ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value 

For SVG export only. Sets the import rule for google fonts in the exported SVG. Possible values: 

• false (default): No google fonts import rule is added. 
• true: Adds the @import rule to the exported file. Useful if you want to use fonts that are not available by default on Windows or macOS.

Note: This property is set to false by default because when enabled, Google fonts override native fonts, and native fonts are generally better rendered in the browser.

Specifies if the row is a header row for the table. The header attribute can be either a boolean (default) or an integer. Possible values: 

• Boolean: True if the row is a header row. False otherwise.
• Integer:
  • wk true
  • wk false
  • wk mixed

Only one of the first five rows of a table can be set to True (see Repeated headers). If the value is set to True for a row, the attribute is set to True for all the preceding rows. 

If the value is set to False for a row, it is also set to False for all the following rows. 

Specifies if the height of a 4D Write Pro document's headers and footers resize automatically to avoid truncating their contents.

Possible values:

• wk true (default for 4D Write Pro documents)
• wk false (default for converted 4D Write documents)

(Read/Write) Number of rows of the table with the attribute wk header set to True. 

Maximum value is 5. If you pass a value above 5, wk header is set to True for the first five rows only (see Repeated headers).

Parameter for the WP Table get rows command to return header rows of a table.

• wk auto (default): height is based upon the contents of the element
• Defined size: size expressed using real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

The wk height attribute is overridden by wk min height (if defined).

HTML code is formatted to be easier to read.

ID of the element (header, footer, body, paragraph, image, text box, table, or row). Value type: String

Note: The ID cannot be empty for a text box. 

• Value returned (WP GET ATTRIBUTES): If the image was defined through a network URL, the target image is returned if it was already loaded, otherwise an empty image is returned.

Use wk image url if you want to handle pictures through URLs or local URIs.

Sets the display mode of anchored and inline images. Possible values:

• wk scaled to fit (default)
• wk truncated
• wk truncated centered
• wk proportional
• wk proportional centered
• wk replicated
• wk replicated centered

Note: The origin and clipping rectangles are always set to the content box (the image rectangle excluding the padding and border area).

Use wk background display mode if you want to set the display mode of images used as background.

• If the expression can not be evaluated or does not return a valid 4D picture, an unloaded image graphic will be displayed (empty image with black border).
• If attribute is set to " " or used with WP RESET ATTRIBUTES, the expression will be removed and the image will no longer be defined by it. Doing this before the image has been computed will result in an empty image.

Specifies an anchored image defined through a 4D formula object.

Note:

• If the formula can not be evaluated or does not return a valid 4D picture, an unloaded image graphic will be displayed (empty image with black border).
• If attribute is set to Null or used with WP RESET ATTRIBUTES, the formula will be removed and the image will no longer be defined by it. Doing this before the image has been computed will result in an empty image.

• Value returned (WP GET ATTRIBUTES): Network URL or data URI. It may not be equal to the initial URL for an image not referenced with the network URL (only network URLs are kept). For local file URLs, the image stream itself is kept in the document and thus the URL returned is a data URI with the image stream encoded in base64.

Use wk image if you want to handle images as picture expressions.

Import HTML expressions as raw text between ##htmlBegin## and ##htmlEnd## tags. 

Log object containing information about the .docx import operation. Properties are read-only and cannot be set:

Warning: importLog is a custom attribute, thus the wk import log constant cannot be used by WP SET ATTRIBUTES, WP GET ATTRIBUTES or WP RESET ATTRIBUTES command (for more information, see Using custom attributes).

Available for 4D Write Pro areas only

For Japanese language. Strings are compared according to the meaning (not the writing style). For example, "あ" is considered the same as "ア". 

When this option is set, wk width insensitive is implicit (considered set), however, the opposite is not true.

When replacing text, the existing character style is retained (if possible).

Apply destination paragraph styles. In case of wk append operation, insert contents without initial paragraph break. 

Links a paragraph with the next so that they cannot be separated by automatic page or column breaks. If applied to a target that is not a paragraph, this option is applied to the paragraphs inside the target. Possible values: 

• true - Paragraph is linked with the next
• false - (default) Paragraph is not linked with the next

If a break is manually added between two linked paragraphs, this attribute is ignored.

If this attribute is applied to the last paragraph of the last cell in a table, the last row of the table is linked to the following paragraph. 

• wk unit cm (default): centimeters
• wk unit pt: points
• wk unit px: pixels
• wk unit percent (only for wk line height and wk background size h / wk background size v)
• wk unit mm: millimeters
• wk unit inch: inches

Note: When a unit that is not supported by the ruler is selected through this attribute (i.e. wk unit px or wk unit percent), the ruler then uses the cm unit.

Leading character attribute for the object using wk tab default or objects in the collection using wk tabs.

Aligns text or tab to the left (value for wk text align, wk type, or wk tab stop types) or sets starting position of background image (value for wk background position h)

• wk normal (default): use value based upon text size
• Height expressed using a number or a string value:
  
  • Real: height in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) A relative value (percentage %) is also supported.

• absolute url, for example "http://www.4d.com/"
• relative link, for example "/test/page.html" (the link is relative to the database structure file)
• bookmark link, for example "#Introduction"
• 4D method link, for example "method4D:myAlert?parameter='Hello%World!'"
• empty string = no link

• wk auto (default): sets the starting value to 0.
• an integer value: starting value

• For unordered lists: string used as list item marker (usually a single character string, e.g. "-")
• For ordered lists: string containing the "#" character. "#" is a placeholder for the computed number or letter(s). Default is “#.”, so if current list item number is 15 and list style type is decimal, list item marker string will be "15."

• For unordered lists: string used as list item marker (usually a single character string, e.g. "-")
• For ordered lists: string containing the "#" character. "#" is a placeholder for the computed number or letter(s). Default is “#.”, so if current list item number is 15 and list style type is decimal, list item marker string will be "15."

• wk none (default): list item marker is not defined by an image
• any valid image such as a 4D picture variable or expression

• Value returned (WP GET ATTRIBUTES): If the image was defined through a network URL, the target image is returned if it was already loaded, otherwise an empty image is returned.

Use wk list style image url if you want to handle pictures through URLs or local URIs.

• wk auto (default): height is based upon image size
• Defined size: size expressed using real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

• wk none (default): list item marker is not defined by an image
• a network URL or a data URI, absolute or relative to the structure file

• Value returned (WP GET ATTRIBUTES): Network URL or data URI. It may not be equal to the initial URL for an image not referenced with the network URL (only network URLs are kept). For local file URLs, the image stream itself is kept in the document and thus the URL returned is a data URI with the image stream encoded in base64.

Use wk list style image if you want to handle list item marker images as picture expressions.

• wk disc (default)
• wk circle
• wk square
• wk decimal: 1 2 3
• wk decimal leading zero: 01 02 03
• wk lower latin: a b c
• wk lower roman: i ii iii iv
• wk upper latin: A B C
• wk upper roman: I II III IV
• wk lower greek: alpha, beta, gamma, etc.
• wk armenian
• wk georgian
• wk hebrew
• wk hiragana
• wk katakana
• wk cjk ideographic
• wk hollow square
• wk diamond
• wk club
• wk decimal greek
• wk custom: unordered list with "-" as default list item marker; this is a convenience style used in order to customize a list item marker with wk list string format LTR or wk list string format RTL without modifying standard list item markers
• wk none

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific margin

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific margin

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific margin

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific margin

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific margin

Used for resampling (reducing) images to preferred resolution. For SVG images in Windows, used for rasterization. 

Default values: 

• 300 (for wk optimized for = wk print)
• 192 (for wk optimized for = wk screen)

Maximum possible value: 1440

4D Write Pro document is saved as standard MIME HTML with HTML documents and images embedded as MIME parts (encoded in base64). Expressions are computed and 4D specific tags and method links are removed. Only text boxes anchored to embedded view are exported (as divs). This format is particularly suitable for sending HTML emails with the SMTP_QuickSend command.

• wk auto (default): minimum height is based upon the contents of the element
• Defined size: size expressed using real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

The wk min height value overrides the wk height attribute.
 
Note: This attribute is not supported by rows, columns, and cells.

• wk auto (default): minimum width is based upon the contents of the element
• Defined size: size expressed using real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

The wk min width value overrides the wk width attribute.

Indicates if the document has been modified since its associated object was created (see below). Possible values:

• True - document has been modified
• False - document has not been modified (default when the object is created)

This property is always set to false when the object containing the document is created (i.e. with WP Import document, WP New, an object copy or when the object field/attribute is loaded from the database). It is automatically set to true by 4D Write Pro as soon as a modification is done to the contents of the document, whatever the origin of the modification (user action or programming). 

Notes: 

• A new value evaluated from a formula or a new image loaded from a URL is not considered as a document modification (the source string is left untouched). 
• Once set to true by 4D Write Pro, this property is never automatically set back to false, even if an "undo" or an "export" action is executed. However, since it is a read-write property, it can be set by your code.
• Unlike wk date modified, wk modified is volatile, i.e. it is not stored in the document.

Style sheet name

Formulas are never highlighted, whatever their display mode (value for wk formula highlight)

• existing style sheet name
• wk none (default)

Position attribute for the object using wk tab default or objects in the collection using wk tabs. 

Defines how an exported document is optimized based on its intended medium. 

Possible values:

• wk print (default value for wk pdf and wk svg)
  • Bitmap pictures may be downscaled using the DPI defined by wk max picture DPI or 300 (default value) and may be converted to PNG if codec is not supported for the export type.
  • Vectorial pictures are converted to PNG using the DPI defined by wk max picture DPI or 300 (Windows only)
  • If a picture contains more than one format, the best format for printing is used (e.g., .tiff instead or .jpg)
• wk screen (default value for wk web page complete and wk mime html)
• Bitmap pictures may be downscaled using the DPI defined by wk max picture DPI or 192 (default value) and may be converted to JPEG (opaque images) or PNG (transparent images) if codec is not supported for the export type.
• Vectorial pictures are converted to PNG using the DPI defined by wk max picture DPI or 192 (Windows only)
• If a picture contains more than one format, the format for screen rendering is used.

Note: Documents exported in wk docx format are always optimized for wk print (wk optimized for option is ignored). 

Read/write protection is ignored and strings in protected areas can be replaced.

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific padding

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific padding

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific padding

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific padding

• Size expressed using a number or a string value:
  
  • Number: size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters)
• wk none (default): no specific padding

Controls the automatic page break feature inside paragraphs. It applies:

• to all the paragraphs inside the target  
• to the parent paragraph(s) when the target is a text range

Possible values:

• wk auto (default): no constraints regarding page breaks inside the paragraph/table
• wk avoid: prevents paragraph from being broken into parts on two or more pages (when possible).

Controls the automatic page break feature inside table rows. It applies:

• to all the rows inside the target  
• to the parent rows when the target is a text range or a cell range

If this option is applied to a table, it is actually applied to the rows of the table, not the table itself.

This option is not taken into account if wk page break inside table is set to wk avoid. 

Possible values: 

• wk auto (default): a row may be split in two parts when the content of any cell (of the row) does not fit in the page when a physical page break occurs
• wk avoid: table rows are never split
• wk mixed when reading the attribute

Compatibility note: for documents created with versions lower than v19 R4, the value for each row is set to wk avoid.

Sets whether a table can be split between two rows when it is larger than the page. It applies: 

• to all the tables inside the target (document, section, table range or element)
• by extension, to the parent table(s) when the target is a text range, a row range, or a cell range

Possible values: 

• wk auto (default): no constraints regarding page breaks inside the table
• wk avoid: prevents table from being broken between two rows (when possible)
• wk mixed when reading the attribute

Page number of the first page of the section, subsection or document (Read-only with subsections and documents, writable only with sections). Possible values: any integer value >=1

• True (default): document starts on a right page
• False: document starts on a left page

• Real: Height in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt,cm,mm, inches.

For SVG export only. Index of the page to export to svg format (default is 1). Page index starts at 1 for the first page of the document.

Note: Page index is independent from page numbering.

• Real: Size in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt, cm, mm, px, inches.
• wk none: no specific margin.

• Real: Size in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt, cm, mm, px, inches.
• wk none: no specific margin.

• Real: Size in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt, cm, mm, px, inches.
• wk none: no specific margin.

• Real: Size in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt, cm, mm, px, inches.
• wk none: no specific margin.

• Real: Size in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt, cm, mm, px, inches.
• wk none: no specific margin.

• wk portrait (0) (default)
  
• wk landscape (1)
  

Document page size (standard action)

Mode for displaying the 4D Write Pro document in the form area onscreen. Possible values (string):

• "draft": draft mode with basic document properties
• "page": most complete view mode, which includes page outlines, orientation, margins, breaks, headers and footers, etc.
• "embedded": view mode suitable for embedded areas

• Real: Width in wk layout unit.
• String: CSS string with value and unit concatenated (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters). Supported units: pt,cm,mm, inches.

.pdf extension. 4D Write Pro document is saved in PDF format, based on Page view mode.

The following metadata is exported in a PDF document:

• Title 
• Author 
• Subject 
• Content creator 

Notes: 

• Expressions are automatically frozen when document is exported
• Links to methods are NOT exported

Use point character (value for wk tab decimal separator)

Use the first dot or comma from the right (value for wk tab decimal separator)

Selector for wk optimized for.

When used as value of wk image display mode, the image is aligned at the top left of the content box, not replicated, scaled to fit the content box, and it keeps its aspect ratio.

When used as value of wk background display mode, presets the following attributes:

• wk background width = "contain"
• wk background height = "auto"
• wk background repeat = wk no repeat
• wk background origin = wk padding box
• wk background position horizontal = wk left
• wk background position vertical = wk top

When used as value of wk image display mode, the image is centered in the content box, not replicated, scaled to fit the content box and it keeps its aspect ratio.

When used as value of wk background display mode, presets the following attributes:

• wk background width = "contain"
• wk background height = "auto"
• wk background repeat = wk no repeat
• wk background origin = wk padding box
• wk background position horizontal = wk center
• wk background position vertical = wk center

Defines the read/write protection status for a 4D Write Pro target (excluding style sheets). Possible values:

• wk true - The target is defined as protected and cannot be modified when global protection is enabled.  
• wk false - The target is not protected. (default)
• wk mixed - (Range targets only). Part of the target is defined as protected. The protected part cannot be modified when global protection is enabled.

Note:
Changing the protection status of a parent target will also change the status of any of the target's children.

Enables or disables the global protection (read/write) status of a 4D Write Pro document. Possible values:

• wk true - Protection is enabled. Protected targets in the document cannot be modified.
• wk false - Protection is disabled. (default) All targets in the document can be modified.

Specifies that all expressions in the document are recomputed before printing or freezing (default value).

Defines if formulas must be recomputed when exported. Possible values: 

• true - Default value. All formulas are recomputed 
• false - Do not recompute formulas

Formulas displayed as references are highlighted (value for wk formula highlight)

When used as value of wk image display mode, the image is aligned at the top left of the content box, replicated, and keeps its original size.

When used as value of wk background display mode, presets the following attributes:

• wk background width = "auto"
• wk background height = "auto"
• wk background repeat = wk repeat
• wk background origin = wk padding box
• wk background position horizontal = wk left
• wk background position vertical = wk top

When used as value of wk image display mode, the image is centered in the content box, replicated, and keeps its original size.

When used as value of wk background display mode, presets the following attributes:

• wk background width = "auto"
• wk background height = "auto"
• wk background repeat = wk repeat
• wk background origin = wk padding box
• wk background position horizontal = wk center
• wk background position vertical = wk center

Screen resolution for the contents of the 4D Write Pro area. Possible values:

• wk auto (0)
• Number greater than 1

Aligns text or tab to the right (value for wk text align, wk type, or wk tab stop types) or sets starting position of background image (value for wk background position h)

When used as value of wk image display mode, the image is scaled to fit the content box and is not replicated. 

When used as value of wk background display mode, modifies the following attributes:

• wk background width = "100%"
• wk background height = "100%"
• wk background repeat = wk no repeat
• wk background origin = wk padding box
• wk background position horizontal = wk left
• wk background position vertical = wk top

Selector for wk optimized for.

Enables the auto spellcheck. Possible values: True/False

• Range start offset, or
• Section or subsection text start index in the document body (for subsection, text start index of the parent section).

Value type: Longint

• wk none (default)
• existing style sheet name

4D Write Pro document page is saved in SVG format, based on Page view mode.

Note: When exporting to SVG, you can only export one page at a time. Use the wk page index to specify which page to export.

Use decimal separator as returned by GET SYSTEM FORMAT (value for wk tab decimal separator).

Character used as decimal separator by decimal tabulations (see wk tabs). Possible values:

• wk point or comma: use the first dot or comma from the right (default for new blank documents)
• wk point: use the point character
• wk comma: use the comma character
• wk system: use decimal separator as returned by GET SYSTEM FORMAT (default for imported legacy 4D Write documents)

Object containing the attributes of the default tab within the target (e.g., paragraph, body, etc.). Default tab attributes can include:

Note: As a shortcut for defining the offset only, you can directly pass a numeric value in the current unit (e.g., 1.5) or a CSS text value (e.g., "3cm"). 4D will construct the tab object automatically.

COMPATIBILITY NOTE: While this selector continues to work for compatibility purposes, it is recommended to use wk tab default or wk tabs instead. 

Specifies the leading characters for tabs in paragraph ranges.
Possible values:

• Text array
• Text

Synchronized with the wk tab stop offsets and wk tab stop types arrays.

COMPATIBILITY NOTE: While this selector continues to work for compatibility purposes, it is recommended to use wk tab default or wk tabs instead. 

Specifies tab offsets for the target. Possible values:

• Array of tab offset values
  COMPATIBILITY NOTE: Previously the last value of the array was the default tab offset value (not an absolute value). As of 4D v17 R5, the last value is an absolute value (not the default value). Use wk tab default to define the default tab value.
• Scalar value

Values are expressed using CSS strings (default) or Real values in wk layout unit. Maximum value is 10,000pt.

Synchronized with the wk tab stop leadings and wk tab stop types arrays.

COMPATIBILITY NOTE: While this selector continues to work for compatibility purposes, it is recommended to use wk tab default or wk tabs instead. 

Specifies tab stop type for the paragraph. Possible values:

• array of tab stop type values (if tab stops have been defined through an array). 
• wk left (default)
• wk right
• wk center
• wk decimal
• wk bar

Synchronized with the wk tab stop offsets and wk tab stop leadings arrays.

(Read-only attribute) The parent table. Value type: Object

• wk left (default)
• wk right
• wk center

Collection of tab objects.

Each tab object contains one or more of the following attributes:

Note: As a shortcut for defining the offset only, when using WP SET ATTRIBUTES you can pass a numeric value in the current unit (e.g., 1.5) or a CSS text value (e.g., "3cm") as a collection element. 4D will construct the tab object automatically.

An empty collection is returned by the WP GET ATTRIBUTES command if the target:

• contains mixed tab values, or 
• does not contain absolute values.

• wk left (default)
• wk right
• wk justify
• wk center

Text box

• a CSS color ("#010101" or "#FFFFFF" or "red"). Default is "#000000" if string.
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

• Real: Size in wk layout unit. Default is 0.
• String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

• a CSS color ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

Default is "currentColor" if string, or wk default if longint.

• wk none (default): no linethrough effect
• wk solid: draw a solid line on the selected text
• wk dotted: draw a dotted line on the selected text
• wk dashed: draw a dashed line on the selected text
• wk double: draw a double line on the selected text
• wk semi transparent: dimmed line on the selected text. Can be combined with another line style.
• wk word: draw a line on words only (exclude blank spaces). Can be combined with another line style.

• a CSS color ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)
• wk transparent (default)

• Size expressed in points. Default value: 1pt

• wk capitalize: first letters are set to uppercase
• wk lowercase: letters are set to lowercase
• wk uppercase: letters are set to uppercase
• wk small uppercase: letters are set to small uppercase
• wk none (default): no transformation

• a CSS color ("#010101" or "#FFFFFF" or "red").
• a 4D color longint value (see _o_OBJECT SET COLOR command)
• a longint array containing an element for each R, G, B component (0-255)

Default is "currentColor" if string, or wk default if longint.

• wk none (default): no underline
• wk solid: draw a solid underline
• wk dotted: draw a dotted underline
• wk dashed: draw a dashed underline
• wk double: draw a double underline
• wk semi transparent: dimmed underline. Can be combined with another line style.
• wk word: draw an underline for words only (exclude blank spaces). Can be combined with another line style.

layout value for wk anchor layout

layout value for wk anchor layout

layout value for wk anchor layout

layout value for wk anchor layout

layout value for wk anchor layout

When used as value of wk image display mode, the image is aligned at the top left of the content box, not replicated, and it keeps its original size. 

When used as value of wk background display mode, presets the following attributes:

• wk background width = "auto"
• wk background height = "auto"
• wk background repeat = wk no repeat
• wk background origin = wk padding box
• wk background position horizontal = wk left
• wk background position vertical = wk top

When used as value of wk image display mode, the image is centered in the content box, not replicated, and it keeps its original size.

When used as value of wk background display mode, presets the following attributes:

• wk background width = "auto"
• wk background height = "auto"
• wk background repeat = wk no repeat
• wk background origin = wk padding box
• wk background position horizontal = wk center
• wk background position vertical = wk center

Type of 4D Write Pro object. Possible values:

• wk type default: Range or section with not defined type
• wk type character: Character type
• wk type paragraph: Paragraph type range
• wk type image: Image (anchored and inline)
• wk type container: Header or footer, for instance
• wk type table: Table reference
• wk type text box: Text box

For ranges of cells, columns and rows only:

• wk type table row: Table row reference
• wk type table cell: Table cell reference
• wk type table column: Table column reference

For subsections only:

• wk first page: First page subsection
• wk right page: Right page subsection
• wk left page: Left page subsection

For tabs only, value used in the object for wk tab default or the objects of the collection for wk tabs:

• wk left: Aligns tab to the left
• wk right: Aligns tab to the right
• wk center: Aligns tab to the center
• wk decimal: Aligns tab on the decimal
• wk bar: Inserts vertical bar at tab position

Character type

Text box (value for wk type)

For string comparison, use the keyboard language property from the form object being edited instead of the current data language (default). 

Note: Ignored if the document is offscreen.

Formulas displayed as values are highlighted (value for wk formula highlight)

Sets vertical alignment of an element. Can be used with characters, paragraphs, pictures, text boxes, tables, table rows, and table columns/cells. Cannot be used with sections or subsections. Possible values:

• wk baseline: aligns baseline of element with baseline of parent element
• wk top: aligns top of element with top of tallest element on the line
• wk bottom: aligns bottom of element with lowest element on the line
• wk middle: element is placed in middle of parent element
• wk superscript: aligns element as if it were superscript
• wk subscript: aligns element as if it were subscript

For characters, wk top and wk bottom have the same effect as wk baseline.
 
For paragraphs, wk baseline, wk superscript and wk subscript have the same effect as wk top.
 
For tables, table rows, and table columns/cells, only wk top, wk bottom and wk middle values are supported.

Displays or exports background images/color, anchored images and text boxes (for display, visible effect in Page or Embedded view mode only). Possible values: True/False

Displays or exports a default black rectangle for images that cannot be loaded or computed (empty images or images in an unsupported format). Possible values: True/False. Default value: True

If value is False, missing image elements will not be displayed at all even if they have borders, width, height, or background; this may impact the page layout for inline images.

Displays or exports the footers (for display, visible effect in Page view mode only). Possible values: True/False

Displays or exports the headers (for display, visible effect in Page view mode only). Possible values: True/False

Displays invisible characters. Possible values: True/False

Displays the horizontal ruler. Possible values: True/False

Enables the HTML WYSIWYG view by removing proprietary 4D Write Pro HTML/CSS tags. Possible values: True/False

Displays the page frames (visible effect in Page view mode only). Possible values: True/False

Displays or exports all 4D expressions inserted in the document as references. Possible values: True/False

Displays the vertical ruler (visible effect in Page view mode only). Possible values: True/False

.htm or .html extension. Document is saved as standard HTML and its resources are saved separately. 4D tags and links to 4D methods are removed and expressions are computed. Only text boxes anchored to embedded view are exported (as divs). This format is particularly suitable when you want to display a 4D Write Pro document in a web browser. 

Only strings that are complete words are considered. Matching strings within other strings are not considered. For example, "where" is not considered when found within "somewhere".

Sets width of element. Possible values:

• wk auto (default): width is based upon the contents of the element. Not available for text boxes (converted to 8 centimeters). 
• Defined size: size expressed using a real or string value:
  
  • Real: Size in wk layout unit.
  • String: CSS string with value and unit concatenated. (e.g.: "12pt" for 12 points, or "1.5cm" for 1.5 centimeters) Minimum value: 0pt, maximum value: 10,000pt.

The wk width attribute is overridden by wk min width if defined.
 

For Japanese language. Strings are compared by character width. For example, "ｱ" is considered the same as "ア". 

Zoom percentage for displaying the contents of the 4D Write Pro area. Possible values:

• Number greater than 1